The Real Beginning of the Art Year

Things have been picking up for February! I’ve been starting up the con season, doing commissions, and more art! If you want to keep up with my tasks in real time you can follow me on Twitter and Instagram! I’m also cultivating my new Ko-Fi page for tips, so stop by there as well!

Most of Early February was preparing for Northwest Indiana Comic-Con, the first con I’ve had in years due to the plague. It’s nice to resupply and get ready. I’ve been taking on extra hours at my day job to get more money to print and reprint missing things. Luckily, NWI Comic-Con was better than I worried about! My Cat Stickers are a smash hit, they sold even more than my comics!

At Northwest Indiana Comic Con 2022

My stickers have grown with my newest addition to my growing collection of stickers!

Hipster Medusa Large Sticker

Thanks to StickerNinja, you can get a large 5×4 size of my Hipster Medusa stickers!

Hipster Medusa Sticker Size Comparison

While there, I took one nice marker commission of a Tracksuit Mafia guy from the Hawkeye show and comics.

His comic-inspired colors were simple enough, though I was worried I’d run out of ink in my Copics.

My next cons are CODCon, and Schaumburg Library Con. All of these before my giant event at Anime Central in April! It’s going to be a big jump for me, and I have a bunch of rethinking of my convention approach to do.

I’ve been working on new digital commissions as well! This Family Portrait commission is another experimental one where I’m doing my hardest to try simple painting. I’ll say that I’m getting faster and cleaner at painting, since I’m not getting lost in the weeds with brushes. I also decided to stick with my stylization and not stress hard about an exact likeness.

Family Portrait Digital Commission

This one is more of a likeness drawing, and I get kinda nervous when it comes to commissions where I draw likeness. But my client was satisfied with the sketches, so I’m no longer worried.

Family Portrait Commission Sketch Process

The Art experiment continues where I skip the inking process and go straight to colors. The coloring went faster overall because I began the flat coloring at a lower resolution and I didn’t use the lasso tool on my line art.

Family Portrait Commission Flat Color 
Process

To break out of my comfort zone, I bothered to look up how the skin varies in temperature. Unfortunately, I got frustrated by the odd in between look of this painting, thinking I was making the face look clownish. I settled for a subtle red splotch in the middle to settle my mind. I’ll figure this out if I do studies in my own time.

Wife Portrait Commission Skin Gradient Process

This next part is the more tedious part, as I’m painting over my pencil art like a physical painting. Without formal painting training, I’m going off of tutorial videos. Many about basic edge control and blending.

Husband Portrait Rendering Process

I don’t like the rendering step in the process because it’s boring, and I have no idea how to make it interesting. The rendering is half the reason I don’t like painting. Despite that, I press forward!

Family Portrait Commission Final Rendering Process

I tackled another large commission for a friend. This one was for an icon, which is simple enough for me!

Mohawk Cat Icon Commission

I’m getting used to sketching in the Artflow Phone App on my Samsung Galaxy Note 9. I draw all my icon sketches on 150 dpi 3 inch canvases because it emulates drawing on a Post-it Note.

February Cat Icon Sketches


She liked sketch number two on the top middle and wanted the Mohawk to be longer, so I obliged.

February Cat Icon Final Sketch

I ink and flat color in my trusty Clip Studio Paint program! It’s a common step where I use my Lasso and Hard Round Brushes to get down a drawing area. Once that tough part is done, I can plunk down the basic colors I need with a Clipping Mask!

There’s plenty of trial and error with figuring out my lighting. Other than that, I took enough breaks to get out of my own head and simplify what I wanted to do.

Add some detailing to show off the materials and I complete a great looking icon for silly Discord conversations!

If you want a commission yourself, you can check my prices on my commissions page!

Here’s some old art from a game jam Adam and I worked on 2018 about being a liar in an office space. I was messing around with silly designs for office workers. Adam converted my art to pixel art, as I didn’t know about making pixel art at that time.

Outliers Character Art

Other Art I’ve been doing and uploaded to my Illustration and Sketchbook Galleries. A bunch of bird people just vibing. I don’t draw that many birds. There’s too much to draw out there.

Some dog guard sketches that I’m brainstorming for Blackmask. I’m still doing new writing for the game, as I’ve sent so much pixel art for Adam to program. Adam’s shooting for having a playable demo ready for summer, but I’ll keep you all informed.

Tower Shield Dog Knight

Monkey Knight Sketches I’m also considering for Blackmask. I haven’t thought about monkeys that much before recently. But now I’m figuring out cool ways to work in Blackmask. Having a prehensile tail is a straight-forward, yet unique way to add some flair to a sword and board warrior.

Monkey Knight

And finally, some more miscellaneous sketches I drew of people I see around when I’m at work or anywhere else. It gets tough seeing people’s faces with their masks on, so I use my imaginations on many of them.

These posts get long in the tooth, so next time I’m going to make shorter blogs for easier, faster writing. Otherwise, follow me on Twitter and Instagram for more of my daily tasks. I’ll be off to celebrate my 30th birthday!

Let’s Make A Comic Part 7: Lettering

After Inking, Cleaning Up the Inks, and a side step into Screentoning, It’s time to get on to the lettering phase of Incident at the Game Store. If you’re up to having a signed physical book of Game Store for yourself, you can stop by my Etsy store and grab a copy!

In this step of my multipart tutorial, I’ll be talking about how to set up text and word balloons for comics!

Find Page Files

Again, I’m making the pages with print in mind, so I need the images in as high of a resolution as possible. I often do my heavier text editing in Adobe Illustrator. Inkscape is a freeware alternative that is as good and better than Illustrator! For now, these next steps are in Illustrator. I make a new file with six art boards to the pixel size of the pages I plan to import.

Making a new Illustrator File

Illustrator gives me more options to mess with my text than Photoshop or Clip Studio Paint. I import or “Place” my images in Illustrator, so they’re all in one large file to look at!

Placing PNGs in Illustrator

I get myself started by dimming my art and typing down my general typing and lettering. If you have a script typed out in a word processer, you can copy and paste to your heart’s content! I’m not worrying about the exact font at the moment to start getting the words out.

Typing basic text

I refer to my thumbnails for the bubble placement to the art and the original post image to the dialogue. Not only that, but I cleaned up the dialogue at the feedback of my mom, so it lacks teeth compared to the original post.

Basic word placement

I’m not as confident with my ability to draw word balloons myself, so I generally do it separate from the artwork digitally. Most of what I know about making word balloons is from this tutorial by John Roshell.

All pages with words

I begin the real lettering by arranging the dialogue words in a centered diamond pattern. I take time to putting words on different lines until it looks more professional.

Arrange letters in diamonds

Next, I expand the balloon size and set it up to “anchor” to the top of the panel. I use the Rectangle tool to make a new shape and put it on top of the balloon shape. Then, in the Pathfinder Box’s Shape Modes (Shift+Ctrl+F9), select both of the shapes, select Unite. The paths of those shapes will merge into one new shape.

Cutting in Shapes

Time to create a balloon tail to point to Fatty. Using the pen tool, I can draw a rough tail shape and use the Direct Selection tool to work the shape to a pointed tail. The same steps to Unite the tail to the balloon to have a connected balloon.

Adding the ballon tail

Now make more rectangles and arrange to align to the borders of the panel. I get rid of the fill color for a short time, only seeing the lines. The rectangles must arrange over the round balloon. You can select Object>Arrange>Send to Front) or Ctrl+Shift+] to send objects above each other.

Subtract shape on panel and balloon

After that, select the rectangles and the word balloon. Next, select the Pathfinder’s Shape Modes, and select Minus Front. Cut out the balloon shape for the panel anchoring.

Adjust Leading and Kerning

These steps work for most of the dialogue bubbles I did in this book. For one of them, I made a yelling balloon. Found this tutorial for making yelling dialogue balloons by Jim Campbell.

Creating yelling balloon

I go on Page 3 to do some work on this charging scream from the boyfriend character. I convert the text into an image and then re-arrange and resize the letters. The results are a nice, disjointed scream that emphasizes the dude’s rage well!

Moving Letters

Now that my letters are in a good position, I can punch the screaming up with bold outlines! I used some tips from Comicscraft‘s book on making Emphasis Bubbles.

I make a new little speech bubble and move it to the middle white letter stroke color layer. Next, I manipulate the shape of the ellipse to make the stroke size 10 pt. Then, I adjust the bottom black letter stroke color layer to make it look seamless.

Stroke layer lettering

I use my previous balloon-making techniques to build up a new balloon shape.

balloon tail editing

I rearrange the bubble back in the proper place. Plus, I fiddle with a few more adjustments in my vector nodes, and I’ve completed a new screaming balloon for page 3!

Editing the screaming balloon

Now I do a little to figure out what I can do for page 4 and the fat guy’s maniacal laughter. I try out a Blambot font called Torn Asunder. I created outlines out of the typed font, and edit each letter with the lasso tool to make it look pretty decent.

Break apart text and edit objects

More progress on the laugh. I make it easier for myself to arrange the lettering in groups and manipulate them into sections.

Editing Individual letters!

Fore Page 5 Panel 1, I was laxer, and I stuck with using a Warp filter to the text.

Curving the laughter text

Did some more work on some other panels. For the gross sound effect, I used Torn Asunder from Blambot again!

New Panels and Gross Sound Effects

I didn’t plan enough for sound effects, but it will help to have them. I’m using the Damn Noisy Kids font from Blambot.

Sound Effect Editing

I’m very close to the wrap-up phase of lettering. I first started to use the Newsflash font from Blambot for my title and endings, but I still didn’t feel it was right.

Title Box and End Box

But then, I looked up GameStop’s logo and learned something hilarious and pitiful. GameStop uses the Impact font, a terrible free font that’s in most computers and terrible image memes.

GameStop's Impact Font Logo

Now to start wrapping things up. First, I unlock full of my usable layers, making sure Overprint stroke is checked on all my balloons. Next, I Select all the letter stuff in the panel.

Overprint Balloon Lines

I go to Object>Rasterize and Set it to the Highest Print Res that I have.

Object>Rasterize and Set to High Print Resolution

That’ll make it easier to export the text back to Clip Studio or Photoshop as a transparent layer. I can overlay this on top of all my pages.

All pages basic lettering

I did some last-minute stuff to add a new reaction bubble for Panel 1 of Page 2.

Thick Balloon Steps

Now it’s time to export my stuff from Illustrator. The original digital file is at 600 dpi because it’s easier to shrink than to expand them. So I save to 72 dpi to keep space low.

Export Lettering fro Illustrator

So I export it as a transparent PNG so it will fit in the pages with the screentones that I’m still working on back in Clip Studio Paint.

Import Lettering Image

After importing the rest of my lettering, I use my Layer Masks to clean up the text to fall behind the monster on the page.

The Lettering is now on the page!

I fiddle about with my Lasso, Magic Wand, and Hard Brush to work with my mask. The lettering is now behind the monster, as I need it to be.

Laughter panel before and after.
masks and layered laughter

So I do this for the other pages in the comic, fiddling with other lettering areas.

masks and layer laughter before and after

I’m not liking how straight one panel looks, so I curve it down a bit.

Curving the laughter

One sound effect kinda blends into the line art, so I did a bit of toning work to get it to pop out more.

SFX Toning

I’m pretty much finished with the lettering now, I’m 90% finished with this story! This step was a large learning experience for me! I knew that lettering is an underappreciated art that’s very easy to mess up. I wanted to do my best with this comic, and that includes getting more familiar with lettering. There’s much to still learn, but now I can press forward with Game Store’s tutorial!

Let’s Make A Comic Part 6: Screentoning

Screentoning was originally going to be in the digital touch ups step, but it was getting a bit long, so I broke screentoning into a separate section!

When I drew Incident at the Game Store, I didn’t plan to color the pages because I wanted to make a larger anthology. I’m keeping this step because I already put in the work for it. So it might be helpful for anyone who wants to take the option.

If you’re up to having a signed physical book of Game Store for yourself, you can stop by my Etsy store and grab a copy!

It’s time to use Clip Studio to do something experimental. I’ll be adding screentones to give some of my art a gray tone with only black and white dots. I’m working on a tutorial on screentoning from Whyt Manga. Also check out his comic, Apple Black!

In Manga Studio 5 EX or Clip Studio Paint, there is a Material Tab. It would be in the default UI but if it is not, go to Window>Material>Material[Dot]. You’ll find a variety of textures and screentones from this tab, and you can make custom ones, but I’m making a basic dot pattern. 

Window>Material>Material[Dot]

I select one of the pre-made tones and edit them by clicking “Settings of Toning…” This will give you the Simple Tone Settings window. Next, set the number of lines for 70, which in this instance, determines the amount of dots in the pattern. Then set the Density(B) to 30, white, then determine how big and fat those dots are. After that, I set the Angle at 23 degrees, this is the rotated orientation of the texture. I made it at an angle that’s not an even number, giving it a tiny bit of flaw to the texture.

Adding Setting Up Materials

So now we can drag this texture to my comic and now the entire screen has screentoned! It’ll make a separate screentone layer with a mask of the texture, so this saves a ton of work than other programs.

Fill the layer masks with a transparent color to mask it out, a staple of digital image editing programs. I then edit my masks with a normal unaliased round brush.

Materials Masks

You can also select with my lasso and magic wand tools to mask and unmask as needed. I usually start a panel by selecting an entire panel and filling the general screentone.

Page 1 Panel 1 Basic Screentone Compare

I also do some other screentone things, like adding a darker screen tone for the black girlfriend.

Girlfriend's Skin screentone

II continue these processes for the rest of the pages. I’m nailing down the rough spots I need.

All pages Screentones

I did more experimentation with screentoning. Trying to stack screentone layers on top of each other and masking with a soft brush to for a gradient look.

New Screentone Edits

Again, I created this step before I decided to color the comic properly. The original idea was to keep the book black and white, so there are many steps before I colored.

Now that this all is done, it’s time to put some words to these pictures!

Let’s Make A Comic Part 5: Touch-Ups

Onward from Part 4 of my Inking Section

After inking my comic, Incident at the Game Store, I make some touch ups to the pages to prepare for coloring! I split this section from my inking part, so it won’t stretch so long.

If you’re up to having a signed physical book for yourself, you can stop by my Etsy store and grab a copy!

PDF of all scanned pages

To start, I scan my pages in any scanner that can scan a Portable Document Format (PDF) at 600 dpi and I use Photoshop to import the PDF pages.

Open PDFs with Photoshop

I scan it in Color, Greyscale and Black and White Modes for coverage. But I generally use the color scans, so I have more control over the gray before I work them down to black and white.

Import PDFs All Pages

When you open the PDF in Photoshop, the image files separate. I prefer to pull them into one document, with each page in different layers. This will make it faster to resize and adjust for the print margins!

All pages layered

I use Multiply Layer mode to help me align my artwork, so it’s consistent to crop and align for lettering. 

All layer multiply together

All the layers are on the Multiply Layer style mode: meaning the lighter colors of the layer are clear while the darker ones are solid.

All Pages in Multiply

Next, I crop the page for coloring, adjusting to the comic paper’s trim line for later printing. Don’t fret too much about making it perfect, as it’s difficult to get them all aligned like that in the first place.

All Page Multiply Alignment

Here’s a page that’s now cropped.

Page 1 Cropped Blue Line Pages

From here, use Image>Adjustments>Hue and Saturation to clear the blue pencil sketches. Use the Cyan and Blue dropdown settings to only affect the blue pencil work. Push down the Saturation Bar, then push up the Brightness Bar. This will keep as much gray tone as possible to not destroy my blacks too much.

Hue and Saturation Clean up

I then work with my Image>Adjustments> Levels to bring up the contrast of blacks and whites. Doing as little as I can to not destroy too much of the thinner lines.

Clean up grey pencil art

More Level editing as I try to make my blacks deeper.

Levels Editing

This is the panel of art so far. Now it’s time for more intricate edits.

Page 1 Panel 1 Line Art Edits

This next process is simpler. Use the round brush and tools for a pressure sensitive, size changing brush tool with a white color to clean up stray lines and specks.

Ryan's Round Brushes

The scan caught my paper edits, so I need to clean them up. I use the Lasso tool to move parts of the background lettering to realign the sign letters.

Cleaning paper paste scan

I work on the mall kiosk line art to realign it to something normal.

Store Sign Readjustment and Clean up

Continue with my Brush tool to clean up mistakes I didn’t catch with in the ink drawings.

Large Store Sign Clean Up
Store Sign Clean Up

Here is the entire page so far! The same process is used for working with the rest of my scanned ink art. Time to prep this page for future coloring!

Page 1 Black and White Line Art Edits

First, I adjust the art to be completely black and white with no gray by using Image>Adjustments>Threshold.

Image>Adjustments>Threshold

Adjustment to make sure thinner lines don’t disappear too much.

Threshold Adjustment for Thin Lines

Select >Color Range, then select the white color anywhere.

Finding White Color Range

This will select every pixel in the image with that white color.

Black Line Art Selection

I make a New Layer (Shift+Ctrl+N) and Fill (Shift+F5) in a Black color, making a layer with only the black line art. In general, I do this process with all the pages.  You can also get away with putting your line art Layer Blend Mode to Multiply. But you’d miss out on the flexibility of editing your lines, including the ability to color them without affecting your normal colors.

Transparent Line Art

Here are all page comparisons, from initial scan to final touches!

The differences are minuscule, but this is the process I found to set up my comic pages to color. On Part 5, I will go through the process of adding gray tones with Clip Studio’s Screentoning Features.

Let’s Make A Comic Part 4: Inking

I continue from Part 3 of my Pencil Art Section

It’s been smooth sailing so far, but now it’s onward to inking the pages in my comic story, Incident at the Game Store! If you’re up to having a signed physical book for yourself, you can stop by my Etsy store and grab a copy!

Since I’m inking my own art, I drew my pages in Non-Photo Blue Pencil. It’s be faster for me to get to the inking! I want to ink this comic with the nibs that I have at hand!

Speedball #513EF, Zebra Manga G, and Speedball #101 Imperial Nibs

I use a Speedball #513EF nib, Zebra Manga G nib, and a Speedball #101 Imperial nib with a holder from my old calligraphy nibs. No clue if holders make a huge difference other than holding certain sized nibs, but that’s what I use. The pens get dipped in Blick Black Cat Waterproof India Ink.

First, I start with lining up my panels. Here, I use a 24 inch Metal Staedtler ruler larger than my paper. Plus a 12×7 inch plastic T-Square as it’s transparent. I also use a metal 5x8inch T-Square for my other general straight line work. Finally, I use a 1.0 Black Copic Multiliner for thick lines with little variation on my panels. I’m not confident enough in my inking to go thinner, but I’ll hit that another time.

Inking Page 2 Panel Dots

I mark dots in the panel corners to help me see when to stop my lines for the panel gutters. There are flaws and I overshoot some lines, but I can make the fixes with Artist Pro White later.

Inking Panel Mistakes

Starting with page 3, there’s a huge change up from the last time I made a comic. Now I’m working with manga inspired diagonal panels for action! Some new things I try are letting the panels bleed out the page. There are changes from my thumbnails of re-closing a few panels, it looks pretty nice. All this conveys the action of getting into a fight. It contrasts to the flat panels of the first and final pages. The first panel of page 3 is a good example of me getting out of my rut to something new. Even trying an open panel to work better for the explosive action on the page!

Inking Large Panel Drawing

The next few pages are more straightforward line inking with a ruler and t-square. The sixth and final page in the story turned out cleaner despite my tiny flaws.  Now it’s time for actual inking!

Inking Panels All Pages Complete

To start Page 1’s inking, I began to use my tech pens to line the backgrounds. It’s a sloppy task that I have to fix at a later time. I’m not a fan of my French Curves, but it’s a necessity and better than working it by hand. Backgrounds in general are a slog to ink for me. But I do that first, so I have the easier task of character inking to look forward to.

Page 1 Shelf Inking

I finally began inking my people. I’ve dabbled with nibs in some sketchbooks, but this time it’s do or die in my actual comic pages!

Page 1 Character Inking

I begin some of my first brush work on the girl’s butt. Jumping between Round 2 and Round 1 brushes for my thick and thin lines. Sure, you could do that with one large brush, but my skills are not up to it at the moment.

Page 1 Girlfriends's butt

First, close up of the Fat Man. Fiddling with my G Nib and 0.1 Multiliner Pen to add the tiny hairs and Cheeto dusted hands.

Page 1 Fat Man Reaches

Thinking about this more, his hand should be larger on the panel. I see too much dead space in the original art. So I scan it, scale it up in Photoshop, print a black and white image. Next, I cut it with an X-Acto Knife. Finally, pasting it on top of the old panel with Rubber Cement and presto! Real Life Copy and Paste!

Page 1 Cheeto Hands

I spend time refining Page One with more detail in the backgrounds. Looking back at my references for good game box artwork to fill the shelves and thinking what reads well.

Page 1 Game Box Details

True, I could’ve done the inking simpler and faster, but how would I know if it looks good to me? The entire process of inking page one over two weeks of working. The little details might be good to fill it out the background. At points, I question if anyone would even pay attention?

Page 1 Final Ink Details

Those thoughts come to me when I do art in general. Anyone who thinks making comics is a struggle is right. It isn’t digging ditches, but people claim they can’t draw a straight line despite rulers existing. The point is, the time will be worth it in the end. I’m telling you this as much as I tell myself that as I work on comics.

Page 1 Inking Process

On to page two. At the start, I had an hour to complete one page, but I got quite far, all things considered. My inexperience with nibs and my perfectionism makes me see my crappy, unsteady hand in the lines. I regret not using a brush for the girl’s hair first. I have no clue how to use a ruler with a nib. So, like an idiot, I crosshatched with a nib. Stuff like that makes me never want to try crosshatching again because it never looks right to me!

Page 2  Girlfriend Reaction Inks

Moving on to more line art inking. I’m never used to working so large, as I never have opportunities to settle down and draw. I’m usually doodle in small sketchbooks since I’m always out and about due to life obligations. Nibs continue to take getting used to. My lines aren’t as high quality as I want compared to the pros.

Page 2 Character Inks

On a different day, I decided to ink the rest of the page with brush to block in some lines. Panel two is a case of me miss managing what my lighting should be. I wanted to use the thicker brush and show distance by thinning the lines going back into perspective. But it looks like crap, and I despise myself for it. I attempted a crosshatching gradient with panel 5, but that was an incredible letdown.

Page 2 Character Detail Inks

Doing the finishing touches on page two. Added background elements on panel two, adding continuity with page two. I added some finer details with Multiliners like finger nails and facial hair. To keep continuity with page one and three, I added the wristband for the boyfriend to the fist.

Page 2 Details Inks

I go over to page three and start on my punch. I use a nib to try some more crosshatching and speed lines. In hindsight, I should’ve used a multiliner and a flexible curve ruler for the speed lines. But like a lazy idiot, I didn’t. Now I’m filled with preventable regrets.

Page 2 Final Inks Details

Continue to page three, I add shirt designs to personalize the characters and more damned crosshatching for gradients.

Page 3 inking punch

I’m doing more work with ink. I’m using a bunch of spot blacks to show the darkness of the situation.

Page 3 refined inking

Working in some finishing touches and cross-hatching. At that time, I didn’t have a concrete idea of what the lighting was supposed to be. I was going over and over it with Pro-White to figure it out, especially with the hand.

Page 3 bottom panel inks

I’ll also mention the few paper fixes I’ve done over my various panels and pages. It’s taking scraps of Bristol or printer paper and using rubber cement to paste over the mistakes.

Page 3 Fixing Panels

The process of page three. I’ll pat myself on the back for making my first action sequence. Sure, it’s not Dragonball, but at least I’ve tried to establish that sense of impact.

Page 3 all comparison

Page four went pretty smooth. I managed to ink a majority of this page in 3 hours. It’s less time as I stood up often to stretch and use the bathroom, but still I’m making good time!

Page 4 Line art Beginnings

Some brushwork from my pocket brush and smaller normal brush. I’m getting a more natural line look that brushes can achieve. I still feel like my hair inking needs more practice, but I’m told drawing with a brush could take years. Despite this, there are some tricks I wanted to try out, such as dry-brush strokes to give it a soft look.

Page 4 Brush work

Added more blacks in the pages, reworking fat monster’s hand to keep continuity with page five. If I made a model sheet in the first place, I wouldn’t need to do these changes. I could’ve saved time and ink by leaving the paper blank and filling the blacks in Clip Studio. I guess I’m still in that traditional mindset.

Page 4 Black Fill ins

A comparison of the entire process, inking page four. This page is the fasted page I’ve ever completed due to the page having characters and no background.

Page 4 All Inking progress

Page five These panels were my first pages to start. It’s nice to deviate from Shirley’s Day for something different. This time making wilder lines with the monster and chaos. I continue with the dry brush technique from page four to do that water spray effect.

Page 5 basic line work

This big panel is the last panel I worked on for the entirety of the comic. This page is also the one that gave me the biggest headache. I wanted to do this strange fish-eye perspective. I was struggling to make it work, sinking time into a shot that I wasn’t sure was working.

Page 5 Working on the splash page

Working on detail work. I never feel like I’m creative when it comes to lettering store signs. It’s even more of a challenge with the outlandish perceptive I’m trying.

Page 5 detailing store signs

Continuing to add details to video game boxes and not thinking too much about what exactly the games are. The boxes are thumbnail illustrations that can read at a distance, but not too detailed. Doing all this is still tedious, but needed.

Page 5 complete inking

A comparison, inking all of page five. This page was the last and hardest ever page I worked on. I regret the weird perspective thing, as I should’ve made a normal background and not some dumb wave thing. Still, it got done, and I pulled through it. This can be the hardest thing to say to yourself when creating things. The biggest thing to remember is the layman won’t even notice your mistakes.

Page 5 Inking process

Page six is the first-ever page I worked on when I started inking this comic. I worked with 0.1 Copic Multiliners thinking I could thicken lines as I needed them. I made last-minute additions to the backgrounds by using Pro-White and paper pasting.

Page 6 shelf line art

First, I ink the first half of this page in an hour because it’s character stuff. I try out Speedball Nibs to give me a nice thin line. After that, I try out my Imperial G nibs for the second half of the page; it seems to give me a thicker line.

Page 6 line completions

I didn’t like the size of the eye in the second panel of page 6. So I did more real life copying and pasting. To reiterate, I printed, cut, and pasted an edited a scan of the panel in Photoshop.

Page 6 Digital re-editing
Page 6 Cutting and pasting

Here is a comparison of the final panel. Top is the original, bottom is the new edit.

Page 6 edited panels

Doing the final bits of the page. The black guy having a t-shirt design actually have me the idea to give my protag a t-shirt design too. I was too wishy-washy about the shirt. The twist might be too obvious, but most people won’t know.

Page 6 Fedora Guy Shirt Details

Now finishing up the rest of the pages with some hairy detailing with multiliners and nibs. Likewise, I get in some tiny white details with some of my white gel pens.

Last hair detailing

Here’s the final page process. Again, I worked on these pages out of order of which tasks I want to tackle at any given moment. I completed this entire inking process in 2 months!

Page 6 detailing

This is one of the more involved sections I’ve written. If you try this yourself, you may be faster or slower than me, but don’t fret. This is a process that’s unique to everyone, and everyone goes at their own pace.

Next I’ll be doing some digital touch ups in Clip Studio!

Let’s Make A Comic Part 3: Penciling

I should have plenty of references, so now it’s time to get started laying out the comic in the big paper!

For this section, I’ll be penciling and drawing the large pages of my comic story, Incident at the Game Store! If you’re up to having a signed physical book for yourself, you can stop by my Etsy store and grab a copy!

I’m using Strathmore Smooth Bristol Board Paper. It’s lined for comic printing. These large binder clips to keep my paper on top of the rest of the pad for “cushion.”

Strathmore Smooth Bristol Board Paper

At the start, I’m marking down the rough areas of composition with non-photo blue pencil. This part is a bit newer addition to my workflow, as I’m testing my ability to do this quick. I’ll admit it’s hard to see in a photo, but I’m doctoring the photo in these demonstrations to be easier to see.

Staedtler Mars Technico 780 Lead Holder - 2 mm

This is where your thumbnail pages come in. I use a t-square to line up the panels. Other than that, I don’t worry about exact perspective. I’m making sure to draw light, so it’s easier to erase and make changes if needed.

Page 1 Blue Line Drawing

I began to do some refining and detailing of Panels 1 and 2. Using my GameStop references to establish detail and break up the composition. I’m not used to blue line drawing, since it’s encouraging me to press my marks harder. Since I’m inking my own work, I don’t need to worry about this too much.

Page 1 Shelf Detail Drawing

I did a few last-minute detail changes to page 1 to break up the pattern of games on the shelf. It’s minor, but it makes backgrounds more believable.

Page 1 Game Box Detailing

On to page 2, again it’s hard to get these photos from my phone because the drawings are in non-photo blue lead.

Page 1 Girlfriend's reaction

I did a few sketches to figure out the poses and sketches to figure out panel 2’s composition. When I was drawing the couple, I wasn’t thinking too hard about them being an interracial couple. I wanted to draw a girl with a good butt, and a black girl was the first in my mind because I’m a damn perv. The boyfriend is white because the fat guy is white, and it makes it easy to hide the twist for the monster.

Page 1 Girlfriend Harassment Sketches

Here, I’m refining the panel more.  I swapped the couple’s places to keep the continuity. I feel like I failed to capture the final expressions as well as my thumbnail.

Page 2 Blue Line Sketch Process

The last panels of page 2 are really sloppy, especially the fist. I used my selfie reference and pictures of my own hand to catch the pose of a clenched fist.

Page 2 Bottom Half Sketches

On to page 3. I don’t do much action, so this is my first time drawing a character punching another. The punch needed to be impactful, from the large punch pose to the fat guy’s crumpling body from the impact. With that, I demonstrated a new maliciousness to Mr. Fats, so I got some reference for the old chin down, eyes up face.

Page 3 Blue Line Sketches

For the fat guy’s face squished by the fist, I got inspiration from the Pokémon Origins miniseries. It was the part where Charzard uses Mega Punch on Blastoise. The expression and the folds of fat was exactly what I needed.

Next is page four! It’s a straight-forward page that went fast. The first panel is redundant from the last panel of the previous page. But I kept it, since I didn’t know what to do with that otherwise. Panel 4 is another one of those panels where I use diagonal panels to vary up my comic layouts.

Page 4 Blue Line Sketches

On to page five! I wanted to rework my initial thumbnail to figure out the positions of the monster reveal. I did a some pose sketches of the foreground girl.

Incident at the Game Store Monster Sketches

The girlfriend needed to run away out of the story since she’s finished with her part in this story. Likewise, I also had some trouble with a head angle, so I blew time on studies. That’s not a bad thing, but I was expecting to knock out this page faster.

Page 5 Monster Close up

I’m almost finished with page 5. Put too much detail to the left shelf that before realizing it didn’t go with the warped perspective. There’s trouble erasing the blue lines, so I’ll need to be careful with the inking.

Page 5 Big Drawing

Page six is the last stretch. This is a simple transition zoom out from page five. It’s a testament to my new skills that I was able to plan my layouts more for this kind of thing. I could’ve designed the now fat-ized boyfriend better but this gets the point across enough.

Page 6 Blue Line Drawings

Now, back to drawing the store at a new angle, referring to the first page to keep continuity of the mall outside. Also, I inverted the couple from the first page to a white girl with a black guy to bookend the story. It was a surprising struggle to make the mouth right for the end to get the right amount of filthiness for the look. I dug through enough, creepy refs of someone licking their lips as well.

Page 6 Final Detailing

Compared to Shirley’s Day, my pencils are sloppier, but I got them done faster than the first time I made a comic. Penciling this took me roughly a month to finish. At the time in 2019, I had 4 hours a day available to me to work on these. The backgrounds taking the longest out of the time.

Onward to inking!

Let’s Make A Comic Part 2: References

I continue from Part 1 of my Thumbnail Art Section

In this section, I’ll be demonstrating gathering references for creating my comic story, Incident at the Game Store! If you’re up to having a signed physical book for yourself, you can stop by my Etsy store and grab a copy!

Since the story takes place in GameStop or a legally distinct version of it, I gathered references of the store chain.

GameStop Reference Collage

Here’s some research how I want the Fedorable Man (That’s my name for him) to look. It’s a funny thing to design a stereotypical “Neckbeard” nerd character. There are many ways to tackle it, and there’s no one way to make any character.

Neckbeard Reference Image Collage

I grabbed a few refs of fat people and how fat works. I got some refs of baby hands, as they seem the fattest of the hands.

Fat Folds Reference Collage

When I think about the horror he turns into, I imagine a fat, bloated nightmare. Examples like The Boomer zombie enemy from Left 4 Dead or Nurgle the Plague God from Warhammer come to mind.

Grotesque Fat Monster Reference Collage

Reference hunting gives me an excuse to find anatomy references (These are the safe for work refs I’ll show you ;P). Don’t spend too much time, you only need the references that are relevant to your project. It helps to keep a large folder of past references to save from internet searching.

Butt Grabbing Action Reference Collage

There’s minor fighting actions, so looked for punching and choking references. This is the best time to restudy drawing hands and fists.

Air Choking Reference Collage

Some refs for the crazy fluid attack on page five! It was inspired by this hilarious Rocket Jump video called The Milkman! I remembered the part where he punishes the criminal by spraying milk out of his mouth like a firehouse, drowning him.

Water Hose Reference Collage

Finally, when I can’t find a specific picture to use as a reference, I take my own pictures as references! Sure, I look like a dope, but this is what happens when you make your own references. Never feel bad about using your own body as reference for a pose.

My Face Reference Collage

I made sketches of the characters to keep them consistent in the pages. I don’t think I made any new sketches of the Girlfriend, which sucks! It’s not perfect, and I should’ve made more refined art to save the hassle.

Fatty Turnaround Ink Drawing
Boyfriend Sketches

I gather more references as I work on the comic pages, Now it’s time to start drawing the comic pages!

Let’s Make A Comic Part 1: Thumbnailing

This is my process on how I make preliminary thumbnail art for creating my comic story, Incident at the Game Store! If you’re up to having a signed physical book for yourself, you can stop by my Etsy store and grab a copy!

I was struggling to write a new comic after Shirley’s Day. So I decided to adapt an existing story to save writing time. I got the idea to create a collection of the dumb greentext stories from 4chan, Reddit, and Imgur. Many of these dumb internet posts are outlandish, so they’re a great source of visual ideas for me.

This is the original greentext story. Since it’s anonymous, I have no idea who originally wrote it. So, if someone messaged me claiming they’re the original poster, I’d have to take their word for it.

https://i.imgur.com/wkXCSN8.png
Continue reading

Autumn Draws

I’m making the finishing touches on my freelancing work. Plus, my Twitch streaming is returning while Blackmask development is moving along. I’m also preparing for next year’s convention season. All this and more below!

 

Continue reading